Multicontour Backrest - Mercedes-Benz C 220 1996 Owner's Manual

Head Restraint Height
Raising:
Pull up on head restraint.
Lowering:
Push button (6) and push down on
head restraint.
Adjust head restraint to support
the back of the head approximate­
ly at ear level. The head restraint
inclination can also be adjusted
manually.
Caution!
Do not remove head restraints
except when mounting seat
covers. For removal refer to Head
Restraints in Index. Whenever
restraints have been removed be
sure to reinstall them before
driving.

Multicontour Backrest

1 Bottom
2 Center
3 Top
4 Pressure regulator
5 Side bolster adjustment
Some models may be equipped
with multicontour seats. These
seats have inflatable air cushions
built into the backrest to provide
additional lumbar and side
support.
The amount of cushion height and
curvature may be adjusted after
turning the key in steering lock to
position 2.
The center section (2) can be
selected together with bottom
section (1) or top section (3).
The inflation pressure of the air
cushion can be continuously
varied between position " 0 " =
without pressure, and position " 5"
= maximum pressure, by chang­
ing the pressure regulator (4)
setting.
P91 0 0 25 B13A
The side bolsters of the backrest
can be adjusted with push button
(5):
•
pushing forward -
increase side support,
pushing backward -
decrease side support.
If the engine is turned off, the last
cushion setting is retained in
memory, and automatically adjusts
the cushion to this setting when
the engine is restarted.