Description
2.2 Ergonomic design
2.2.4
Connection technology
A large selection of terminals and connectors are available for the new range of 3VA UL
molded case circuit breakers.
The supported cable cross-sections are based on the size of the molded case circuit breaker
and the cable terminals used. The terminals are fitted either internally or externally to the
molded case circuit breaker.
The connection technology can be easily integrated in the new range of 3VA UL molded
case circuit breakers.
With it you can implement various front and rear main conductor connections for the molded
case circuit breakers in all types of installation (fixed-mounted, plug-in and draw-out).
①
②
③
④
⑤
36
Box terminal
Wire connector
Wire connector, large
Nut keeper kit
Wire connector for 2 cables
⑥
Distribution wire connector for 6 cables
⑦
Front bus connectors extended
⑧
Front bus connectors offset
⑨
Rear connection stud flat
⑩
Rear connection stud round
Only 400/600 A available
1)
3VA molded case circuit breakers with UL and IEC certification
Manual, 01/2019, L1V30435333-01
1)