The insulating measures for IEC applications are presented in the following. The insulating
measures are identified with letters in the tables. These letters stand for the following
insulation accessories:
Note
All the presented insulation measures represent minimum requirements.
Covers can be replaced with higher-quality covers:
• Insulating measure A can be replaced with D and E
• Insulating measure B can be replaced with D and F
• Insulating measure E can be replaced with D
• Insulating measure L can be replaced with K
3VA molded case circuit breakers with UL and IEC certification
Manual, 01/2019, L1V30435333-01
Accessories
4.3 Connection system
213