Advertisement
3 Operation
Fig. 4: Touch control operation panel
The hood is in STANDBY mode when it is
powered. In this state, the display shows
3.1. Lift operation
nothing.
Moving the lift out
By touching the or
button, the lift moves
up.
Info: As long as the lift is extended by less
than 20 cm, the display will show a "0" after
touching the button. When the lift is then
raised by higher than 20 cm, nothing will be
shown on the display. Neither motor nor light
goes on in this condition.
After touching the
button, the light goes on
after 20 cm of lifting height, but motor does
not.
Stopping the lift or pulling it out again
By touching the arrow button
or
the lift is
stopped and/or started in the direction of the
arrows.
Info: The lift can be stopped or moved only
after the height of 20 cm.
Lowering of the lift
By touching the .
Info: After the lift has reached a height of less
than 20 cm, the motor and the lights turn off,
and the hood is in the standby mode. In this
case, no indicator lights on the display.
14
12
12/12/2018
Advertisement
