Copying Images Using "Image Transfer; Changing "Image Transfer" Settings - Sony Cyber-shot DSC-F77A Operating Instructions Manual

Copying images using
"Image Transfer"
– Windows 98/98SE/2000/Me
Connect the camera and your
computer with the USB multi
connecting cable.
"Image Transfer" launches and the images
are automatically copied to the computer.
• Normally "Image Transfer" and "Date" folders
are created inside the "My Documents" folder,
and all of the image files recorded with the
camera are copied into these folders.
• You can change the "Image Transfer" settings
(page 73).
• When "ImageMixer" (page 71) is installed,
image copying is completed using "Image
Transfer," "ImageMixer" automatically
launches and images appear.
– Windows XP
Connect the camera and your
computer with the USB multi
connecting cable.
"Image Transfer" starts up automatically
and the images are automatically copied to
the computer.
Windows XP is set so that the OS AutoPlay
Wizard activates.
If you want to cancel the setting, follow the
procedure below.
a Click [Start], then click [My
Computer].
b Right-click [Sony
MemoryStick], then click
[Properties].
c Cancel the setting.
1 Click [AutoPlay].
2 Set [Content type] to [Pictures].
3 Check [Select an action to perform]
under [Actions], select [Take no
action], then click [Apply].
4 Set [Content type] to [Video files]
and proceed step 3. Set [Content
type] to [Mixed content] and
proceed step 3.
5 Click [OK].
The [Properties] screen closes.
The OS AutoPlay Wizard does not
start up automatically even if the
USB connection is made.
Changing "Image Transfer"
settings
You can change "Image Transfer" settings.
Right-click the "Image Transfer" icon on
the task tray, select [Open Settings]. The
settings you can set are as follows: [Basic],
[Copy], and [Delete].
Right-click here
When the "Image Transfer" starts, the
below window appears.
When you select [Settings] from the above
window, you can only change the [Basic]
setting.
73