Temperature Controller With Function Block Fb - Siemens SIMATIC S5 Manual

Notes for the Reader
This manual describes
the SIMATIC S5 temperature controller module IP 244
the software package FB 162 and the test program for the temperature controller module
The software is on the accompanying diskette and comprises the following parts:
– organization blocks
– function block
– data blocks
The software package and IP 244 module combine to form a unit for machine controls in pro-
cess control applications.
To familiarize you with the application of the temperature controller and to make information as
accessible as possible, the manual has been divided into several separate functional sections.
Definitions of process control terms used in the manual can be found in the glossary.
Part 2 Instructions for the IP 244 describes the hardware requirements. This part
describes the environment in which the module can be used and explains the
required connections.
Part 3 Programming Instructions for the IP 244 describes the function of the firm-
ware on the module and how to program the module. Using this desription, you
can calculate the required parameters and structure them for the data ex-
change between the programmable controller and the module.
Part 4 Programming Instructions for the Function Block FB 162 (64 messages)
describes the program package with which you can operate the IP 244
temperature controller module.
Part 5 You can use the Test Program for the IP 244 Temperature Controller
Module (FB 62, 63) to test the complete operation of the IP 244.
Part 6 Checklist for Start-Up provides notes about the step-by-step installation and
start-up of the hardware and software for the IP 244 temperature controller.
Part 7 In the Glossary you can find definitions of process control terms used in the
manual.
Part 8 The Index helps you to find the section in the manual you need quickly and
easily by means of key words.
Part 9 The Pocket Guide "IP 244 Temperature Controller with Function Block FB 162"
provides you with an overview of all messages and the assignment of the data
blocks DB-A, DB-B and DB-C. It serves as a practical guide to help you create
and enter parameters.
IP244
C79000–D8576–C858–02
OB 1, 20, 21, 22
FB 62, 63, 162
DB 162, 163, 164, 172, 173
Notes for the Reader
1 - 3