Selecting The Conversion Time Of Each Channel - Siemens SIMATIC S5 Manual

Operation

3.4.2 Selecting the Conversion Time of each Channel

Thermocouples, resistance-type sensors and other general-purpose sensors may be connected
to the analog inputs.
The selected conversion time of the analog–digital converter defines the resolution in counts of
the analog input signals.
The plug-in jumper D defines the conversion time of the individual channels.
1 3 5 7
In the special function "measuring via channels 13 and 14", a fixed conversion time of 55 ms
has been selected. With the possible thermocouples or resistance-type sensors, the following
maximum temperature values for setpoint definition result from the sensor voltage and the se-
lectable conversion times:
3–28
IP244B
C79000–B8576–C865–01