Understanding Your Energizer - Gallagher MBS100 Instructions Manual

3E4723 Gallagher MBS100 MBS200 MBS400 MBS800 Mul -Power User Manual

UNDERSTANDING YOUR ENERGIZER

Using the Mode Selector Switch
Mode
Ba ery
Check
OFF
Solar
Ba ery Energizer operates at maximum energy and normal pulse rate
Mains
Power
Note: The energizer stops pulsing if the ba ery drops below 10% to protect
the ba ery from permanent damage. The energizer will turn on again
automa cally if the ba ery voltage increases again. (For example if a solar
panel is connected and starts recharging the ba ery.)
Descrip on
The ba ery charge level is displayed on the bar graph. Ba ery
voltage will be displayed for approximately 10 seconds only to
conserve ba ery. To recheck ba ery, switch off the energizer then
switch back to ba ery check mode.
Energizer is OFF. If you are not using the energizer for extended
periods, disconnect the ba ery from the energizer.
Smart ba ery management ensures the energizer operates
con nuously. If the ba ery voltage is low due to prolonged
periods of low sunlight, the energizer will reduce stored energy
and pulse rate to protect the ba ery from long term damage.
un l 40% of ba ery capacity remains. Suitable for users who
require best energizer performance and are prepared to replace
the ba ery when needed.
Energizer operates at maximum energy and normal pulse rate.
Suitable for indoor permanent installa ons where mains power
is available.
13