Switching Off The Cooling Device; Defrosting The Cooling Device; Replacing The Fuse - Dometic CC32 Operating Manual

CC32, CC40 AC/DC
6.8

Switching off the cooling device

➤ Empty the cooling device.
➤ Switch the cooling device off.
➤ Pull out the connection cable.
If you do not want to use the cooling device for a longer period of time:
➤ Leave the lid slightly open. This prevents odor build-up.
6.9

Defrosting the cooling device

Humidity can form frost in the interior of the cooling device or on the evaporator. This
reduces the cooling capacity. Defrost the cooling device in good time to avoid this.
A
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooling device, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the cooling device.
➤ Leave the lid open.
➤ Wipe off the defrosted water.
6.10

Replacing the fuse

➤ Replace the fuse (8 A 32 V) as shown (fig. 4, page 3).
EN
Operation
15