Troubleshooting - Canon INSPIC S User Manual

Low Battery
Very Low Battery
Firmware
Updating
2 x 3
Aspect Ratio
2 x 2
Aspect Ratio
Status LED Indication
MicroSD Card
Error
Paper Feeding
Failed
Paper Jam
No Paper
Printer Cover
is not closed
properly
Overheat
Connection
Remote
Control Failed
Customized
Sound Failed
Device does
not Work
Take a Photo
When battery level down to 20%
When battery level is very low
When the device is updating firmware
When 2x3 aspect ratio is selected,
8LEDs in the fill light will flash once
When 2x3 aspect ratio is selected,
4LEDs in the fill light will flash once

TROUBLESHOOTING

• Check if the MicroSD card is inserted properly
• Check if the MicroSD card is full
• Check if the MicroSD card is corrupted
Magenta
• Check if the MicroSD card is compatible
• Open the paper compartment cover to check
if Canon ZINK™ photo paper is inserted
Red
• Power off and on the device, the photo paper
will be fed out automatically
Red
• Reload Canon ZINK™ photo paper into the
device
Red
• Close the printer cover properly
Red
• Wait until the device temperature returns to
normal, the device will resume working again
Red
• Make sure the smartphone bluetooth
connection is properly set up.
N/A
• Make sure selection of device on the App is correct
• Make sure smartphone OS is compatible and up to date
• Make sure the device is connected with the App
N/A
• Make sure the App and firmware are up to date
• Make sure the device is connected with the App
N/A
• Make sure the App and firmware are up to date
• Make sure the battery level is not too low.
N/A
If it is, recharge the device
• Make sure the device firmware is up to date
• Make sure print queue buffer is available
N/A
• Make sure device has Canon ZINK™ photo paper
White > Red (Looping)
Red > White (Looping)
White
Actions
15