Canon INSPIC S User Manual page 5

The device has a built-in battery. Please fully charge the device via the USB
cable provided before using.
1
Insert the smaller end of the supplied USB cable into the device and other
end into a chargeable USB adapter.
2
The charging LED light will turn red to indicate charging.
3
Once fully charged, the charging LED will turn green.
− Operating time may vary depending on the battery status, operational
status and environment conditions.
NOTE
About USB Cable
HANDLE THE USB CABLE WITH CARE WHILE CHARGING
• Do not place any heavy objects on top of the cable.
• Do not place the USB cable near heat.
• Do not scratch, damage, twist or pull hard on the cable.
• Do not plug or unplug the cable with wet hands.
• Avoid too high/too low temperature or humid conditions.
• Please unplug the USB cable from power source after charging.
• Please use the supplied USB cable for charging.
SETUP
CHARGING
Charging Status LED
Charging : Red
Full : Green
5