Mounting And Connecting The Wireless Receiver - Viessmann Vitotrol 100 UTDB-RF2 Installation And Service Instructions Manual

Mounting and connecting the wireless receiver

Installing the wireless receiver
4.
2.
1.
8
Q
ë
r
w
Fig.1
1. Remove the cover.
2. Remove the round label from the aperture.
3. Route the lead through the aperture.
Opening the control unit enclosure
!
Please note
Electronic assemblies can be damaged by elec-
trostatic discharge.
Prior to commencing work, touch earthed
objects such as heating or water pipes, to dis-
charge static loads.
3.
5.
4. Seal the aperture with a grommet.
5. Install the wireless receiver.
Installation sequence
7