Warning And Safety Instructions; General Information; Cleaning And Care; Vacuums And Accessories - Miele S2 Series Technical Information

Technical Information
A

Warning and Safety Instructions

1

General Information

All repairs should be performed by a trained technician in strict
accordance with national, state and local codes. Any repairs or
maintenance performed by unqualified personnel could be dangerous.
When servicing, modifying, testing or maintaining appliances, all applicord
laws, regulations and accident prevention guidelines must be observed.
All regulations of the appropriate utility supply companies and standards
relating to safety (not limited to electrical safety) are to be complied with.
Before any service work is started, the vacuum cleaner must be
disconnected from the power supply.
Even with the vacuum switched off, voltage may be applied to some components.
Do not leave the vacuum unattended when it is plugged in. Turn off and
unplug the vacuum before opening the cover.
After work has been completed, a visual as well as an operational check
should always be performed.
2

Cleaning and Care

2.1

Vacuums and Accessories

The vacuum cleaner and other plastic components can be cleaned using a
damp cloth or a cleaner made especially for plastics.
Warning!
Do not use abrasive, glass or all-purpose cleaning solutions, as these can
cause considerable damage to the plastic components of the vacuum or its
accessories.
2.2

Dust Compartment

The dust compartment can be cleaned using another vacuum, if available, or
a dry cloth or brush.
Monitor the bag change indicator and inspect all filters regularly. Replace
them when necessary according to the operating instructions.
4
S2 Canister Vacuums