Motor Protection Filter Frame Removal; Cover Frame Removal; Figure 020-6: Filter Frame Retaining Tabs - Miele S2 Series Technical Information

S2 Canister Vacuums
4.4

Motor Protection Filter Frame Removal

1. Open the casing top wide.
2. Remove the bag.
3. Release the frame retaining tabs with a suitable tool; see Figure 020-6,
Item 1.
4. Remove the frame.
Note:
If it is too difficult to release the tabs from the top, open the frame, insert the
flathead screwdriver behind it and pry it out.

Figure 020-6: Filter Frame Retaining Tabs

Note:
When re-installing, insert the top of the frame first.
4.5

Cover Frame Removal

1. Remove the casing top. See Section 020-4.3.
2. Remove the exhaust filter.
3. Remove the cap. See Section 030-4.1.
4. Release the electronic retainer, Figure 010-3, Item 1, and tilt it upwards,
Figure 010-3, Item 2.
5. Remove the bag holder; see Section 020-4.1.
6. Remove the six cover frame retaining screws (T20); see Figure 020-7,
Item 1.
21
Technical Information