Air Inlet Regulator Removal; Changing The Bag; Figure 020-9: Air Inlet Regulator - Miele S2 Series Technical Information

S2 Canister Vacuums
4.6

Air Inlet Regulator Removal

1. Remove the casing top. See Section 020-4.3.
2. Remove the cap. See Section 030-4.1.
3. Remove the cover frame. See Section 020-4.5.
4. Turn the cover frame over.
5. Remove the air inlet regulator; see Figure 020-9, Item 1.

Figure 020-9: Air Inlet Regulator

4.7

Changing the Bag

1. Open the lid.
2. Pull the bag out by the grip next to the self-closing flap on the collar
(Figure 020-10, Item 1).
3. Discard the full bag in a suitable container (trash can).
4. Remove the NEW bag from the box. DO NOT UNFOLD IT.
5. Slide the new bag into the holder as far as it will go (Figure 020-10, Item 2).
6. Close the lid, making sure that it clicks into place.
Note:
The lid will not close without a bag in place, or if the bag is inserted
incorrectly. Do not force it.
23
Technical Information