Printing Images - Sony Cyber-shot DSC-P41 Operating Instructions Manual

When [USB Connect] is not set
to [PictBridge] on the Setup
screen
You cannot use the PictBridge function,
even when you turn on the camera.
Disconnect the USB cable and set [USB
Connect] to [PictBridge] (page 68).

Printing images

You can select an image and print it. Set up
the camera following the procedure on page
68, and then connect the printer.
MENU
Control button
• You cannot print movies.
• If an error message is sent from the connected
printer during the connection,
about five seconds. In such cases, check the
printer.
On the single screen
a Display the image you want to
print with b/B.
b Press MENU.
The menu appears.
c Select
press z.
d Select [This image] with v/V,
then press z.
The Print screen appears.
Print
Index Off
Date Off
Quantity 1
Exit
• Setting items not available for a particular
printer are not displayed.
flashes for
e Select [Quantity] with v/V,
select the number of images
with b/B.
You can select the number up to 20.
(Print) with b/B, then
VGA
2 9
101 /
OK
69