Related Manuals for Sony TS-DSC-P41-01
Summary of Contents for Sony TS-DSC-P41-01
- Page 1 Document Author: Paul Skelly Version: TS P41.2 Issue Date: 01/01/06 Status: Released Document Location: http://www.tracksnap.com/ www.tracksnap.com TrackSnap Manual Sony DSC-P41 Model TS-DSC-P41-01 TrackSnap is a product range of Comit Services P/L...
- Page 2 Make sure your equipment is fastened securely. Movement of the equipment can be interpreted as motion by the sensor. Version TS P41.2 This document comprises information provided by Suppliers and is Page 2 of 12 assumed to be correct. Model TS-DSC-P41-01 Released...
- Page 3 Model TS-DSC-P41-01 TrackSnap Manual All TrackSnap cameras use a PixController PIR motion detection sensor. PIR stands for Pryoelectric Infra- Red, which detects warm targets in motion over ambient background temperature. A stationary target or a target not moving can not be detected. The target must also have a warmer surface temperature than the ambient background temperature in order to be detected.
- Page 4 POT. When finished you will need to return DIP switches 3 & 4 back to their original setting. Page 4 of 12 assumed to be correct. Model TS-DSC-P41-01 Released...
- Page 5 All switches Down (Off) except SW6 and SW10 Up (ON) and a summary is listed: 10 Sec PIR Delay 24 hour mode of operation Sony P32/P41 Camera Continuous movement movie setting Green PIR LED ON Switches 1 and 2 control the delay between PIR events. This setting is used so you can limit or not limit the number of photos taken when a motion event triggers your board.
- Page 6 Switch 8 controls the operation of the attached camera. You can either setup your camera in digital still mode, or movie/double photo mode. If you want to take digital movies with your digital camera you must have your digital camera setup in movie mode. If your camera setting is in RSP mode, however, you can setup Charge Mode On/Off, which is used to keep your camera settings.
- Page 7 PIR Sensor: Pryoelectric Infrared motion sensor. Detection range out to 24.4 Metres depending on temperature. CDS Photo Sensor: Detects light/dark for day/night operation. Interface Ports Sony/Canon LANC Port Sony ACC Terminal Port Hardwire Camera Control - Shutter, Refresh, Power On/Off DC Power Port External Light Port User Interfaces...
- Page 8 Low battery level detection - the green PIR LED will blink when a low battery is detected. 10-Postion DIP switch so you can easily configure board settings. Tiny board size. Fit a Sony DSC-P41 into a Pelican 1060 case with room to spare. PIR sensitivity POT to adjust the PIR detection range.
- Page 9 Model TS-DSC-P41-01 TrackSnap Manual Version Page 9 of 12 Released TS P41.2 This document comprises information provided by Suppliers and is assumed to be correct.
- Page 10 Model TS-DSC-P41-01 TrackSnap Manual The PIR lens is mounted in the Pelican 1060 case with your board. The lens is centred over the PIR Sensor and is 16.5 mm from the top. We mount the lens with the “ridges” facing towards the PIR sensor. Do not scratch the lens on either side.
-
Page 11: Image Sizes
Exposure Control: +/- 2.0EV Maximum Images (approx): Up to 243 standard VGA images with 16MB Memory Stick. (14821 on 1G Memory Stick Pro) Approximate Battery Life on Supplied batteries :80 shots (Using Optional Sony NiMH AA Batteries: 400 shots/200mins) Weight:134g (without accessories) Dimensions (WxHxD):101.2x53.7x35.6mm... - Page 12 When I use the PixController Be sure to setup your Sony Camera into Movie DIP Switch setting for “Movie taking mode. Mode” I still get still photos. What am I doing wrong?