Connecting The Camera To The Printer; Printing In Single-Image Mode - Sony Cyber-shot DSC-L1 Operating Instructions Manual

Connecting the camera to
the printer
Connect the (USB) jack of the camera
and the USB jack on the printer with the
USB cable (supplied). Turn on the camera
and the printer.
The camera turns to playback mode
regardless of the mode switch position, and
an image in the selected playback folder
and the print menu appear on the LCD
screen.
After the connection is
made, the indicator
appears on the LCD
screen.
1M
2 9 Printer
101 /
Print
All In This Folder
DPOF image
Select
This image
Cancel
When [USB Connect] is not set
to [PictBridge] on the Setup
screen
Even if you turn on the camera, you cannot
use the PictBridge function. Disconnect the
USB cable from the camera and set [USB
Connect] to [PictBridge]. (page 68)
Printing in single-image
mode
When you connect the camera and a
printer, the print menu appears.
Mode switch
MENU
Control button
 Select the desired printing
type with /, then press .
1M
2 9
/
101
Print
All In This Folder
DPOF image
Select
This image
Cancel
All In This Folder
Prints all the images in the folder.
DPOF image
Prints all the images with the
mark (page 73) regardless of the
displayed image.
69