Setting The Date And Time - Sony Cyber-shot DSC-L1 Operating Instructions Manual

Setting the date and time

1
 Set the mode switch to
• To change the date and time on the
Setup screen, select [Clock Set] in
(Setup 2) (pages 47 and 114), and
2
perform the procedure from step
• You can also carry out this operation when the
mode switch is set to
or
18
Mode switch
POWER
POWER button
2
 Press POWER to turn on the
.
power.
The POWER lamp (green) lights up and
the Clock Set screen appears on the LCD

.
screen.
.
Clock Set
Y/M/D
M/D/Y
D/M/Y
2004 / 1 / 1 12 : 00
OK
AM
Cancel
Clock Set
2004 / 1 / 1 12
3
 Select the desired date display
format with / on the control
button, then press .
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable button battery (page 116),
which provides the power for saving the time
data, ever becomes low, the Clock Set screen
will appear again. When this happens, reset the
date and time, by starting from step  above.
Y/M/D
M/D/Y
D/M/Y
: 00 OK
AM
Cancel