Using The Self-Timer - Sony Cyber-shot DSC-L1 Operating Instructions Manual

• The maximum smart zoom and precision
digital zoom scale includes the optical zoom
scale.
• When using the smart zoom, the image on the
LCD screen may look rough. However, this
phenomenon has no effect on the recorded
image.
• You cannot use the smart zoom in the Multi
Burst mode.
To set digital zoom
Set [Digital Zoom] to [Smart] or
[Precision] on the Setup screen (page 112).
When you purchase your camera, [Digital
Zoom] is set to [Smart].
When you slide the zoom lever, the zoom
scaling indicator appears on the LCD
screen as follows.
The W side of this line is optical zoom,
and the T side is digital zoom
Zoom scaling indicator
• The zoom scaling indicator differs according to
the zoom type.
– Optical zoom:
– Smart zoom:
– Precision digital zoom:
• The AF range finder frame does not appear
when using the digital zoom. The
indicators flashes, and AF operates with
priority on subjects located near the center.

Using the self-timer

60min
VGA
or
S AF
1
 Set the mode switch to
press  ( ) on the control
button.
The (self-timer) indicator appears
enlarged on the LCD screen (page 112).
• If the menu is currently displayed, press
MENU first so that the menu disappears.
• You can also carry out this operation when the
mode switch is set to
101
96
, and
.
31