System Definitions - Extron electronics MLS 100 A User Manual

MLS 100 A • User Guide (Continued)

System Definitions

Space
• =
] = Carriage return with line feed
} = Carriage return with no line feed
E ,W =
Escape key, or hex 1B (use W instead of
, , Superscripts indicate the error message displayed if the command is entered incorrectly or with invalid parameters.
14 24 28 =
Specific input number (0 – 4 maximum)
X! =
0 = no connection
1 = input 1 & Aux/Mix
2 = input 2 & Aux/Mix
= Audio gain (per input)
X@
0 to 24; 0 dB through +24 dB in 1 dB steps
X# = Audio attenuation (per input)
0 to 18; 0dB through ‑18 dB in 1 dB steps
= Input to be adjusted (1 – 4)
X$
1 = input 1
2 = input 2
X% = Audio gain/attenuation value (‑18 through +24)
X^ = Volume adjustment range: 0% (90 dB attenuation) to 100% (0 dB attenuation). Adjustment increments are 1 dB for
steps from 1% to 40% volume. Adjustments are in 0.5 dB increments from 41% to 100% volume.
= On/off status
X&
0 = off/disable
= Switcher firmware version (listed to two decimal places e.g.: x.xx)
X*
8
E
for web browsers, or at any time)
3 = input 3 & Aux/Mix
4 = input 4 (audio only) and Aux/Mix
3 = input 3
4 = input 4
1 = on/enable