Notes On Using The Cyber-Shot Station - Sony CSS-TNA Operating Instructions Manual

Notes on using the Cyber-shot Station

Refer to the operating instructions for your camera as well as this manual.
The Cyber-shot Station is not a dust-proofed, moist-proofed, or water proofed product.
About the Adaptor plate:
• Three types of Adaptor plates are included with the Cyber-shot Station. By changing the
Adaptor plates, the Cyber-shot Station allows you to attach three types of cameras.
• Be sure to attach the designated Adaptor plate before using the Cyber-shot Station, or it may
damage the multi connector.
• All the Cyber-shot Station images illustrate the Adaptor plate for DSC-N1.
About the remote control:
• There are buttons that are only compatible with the DSC-N1 digital still camera on the supplied
remote control.
For DSC-N1 users:
• While the camera is set to "Housing
from the normal functions. For further details, refer to the operating instructions supplied with
the camera.
Do not use or keep the Cyber-shot Station in locations subject to the following conditions:
• Locations with extremes of temperature
The temperature in closed automobiles during summer may be extremely hot, causing
deformation or malfunction of the Cyber-shot Station.
• Locations under direct sunlight or near heaters
This may cause deformation or a malfunction of the Cyber-shot Station.
• Locations subject to vibration
• Locations subject to strong magnetism
Precautions:
• Use the nearest wall outlet to get the AC Adaptor plugged in. If any malfunctions occur using
the product, unplug the AC Adaptor to cut off the power source.
• The set is not disconnected from the AC power source (mains) as long as it is connected to the
wall outlet, even if the set itself has been turned off.
• Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
• Do not use the Cyber-shot Station in locations that are subject to strong radio waves or radiation.
Images may not be played back properly.
• Avoid other metalic objects to contact with the connecting parts of the Cyber-shot Station and
the power cord. It may cause a short circuit.
• Recording contents cannot be compensated for if playback is not possible due to damaged
"Memory Stick Duo", a malfunction of your camera or the Cyber-shot Station, etc.
• Do not attempt to connect the supplied USB cable to the multi connector on the bottom of the
camera. It may cause a malfunction due to the damage of the multi connector.
• The screw hole on the bottom of the Cyber-shot Station is for retail display only.
6-GB
Image back/Image forward buttons (
These buttons are only compatible with the
DSC-N1 digital still camera.
These buttons cannot be used with other
cameras.
", the buttons on the remote control operates different
/ )