Setting Up the Printer
1. Box Contents
Ink tanks for setup
Safety and Important Information
Getting Started (this manual)
2. Removing Packing Materials
Remove and dispose of any packing materials
from the printer.
Be sure to remove any orange tape.
Open the top cover and remove the orange tape
Close the top cover.
(Attached to the underside of the
Pull out the
Turn it over.
3. Turning on the Printer
Connect the power cord.
At this time, do not connect any other cables.
Press the ON button.
If the following screen appears, press the ON button to turn off
the power, and redo the procedure from step 2 in "2. Removing
When the following screen appears, use the [
and ] buttons to select a language, and then
press the OK button.