Connections For Transmitting Digital Video (Sdi) Signals Between This Unit And A Camera - Sony CCU-D50P Operating Instructions Manual

Connections for transmitting digital video (SDI) signals between this unit
and a camera
In a system consisting of this unit, a DXC-D35/D35P/
D35WS/D35WSP camera, and CA-D50 Camera
Adaptor, digital video (SDI) signals can be transmitted
between this unit and the camera.
Connections for transmission over CCZ cable (max. length 75 m (246 feet))
CAMERA
Use the procedure described on the next page to
change the cabling in the SDI unit of this unit to SDI
mode, and turn digital transmission on with the system
setting switches.
CCZ cable (max. length 75 m (246 feet))
SDI OUT
Switcher,
video
monitor,
VCR, etc.
The maximum transmission distance over CCZ camera
cable is 75 m (246 feet). The maximum transmission
distance over coaxial cable is 200 m (656 feet). To
transmit over CCZ cable, you will need to change the
cabling in the SDI unit of this unit to SDI mode, and to
turn digital transmission on with the system setting
switches.
CA-D50
Camera Adaptor
CCU/VTR/CMA
CCU-D50/D50P
Camera Control Unit
Notes
• Set the system setting switches as soon as you change
the cabling.
• Y/R–Y/B–Y signals, RGB signals, and S-video
signals are not output when transmitting over CCZ
cable.
Camera
11