17.5 cm Max. Length Power Supply 23 cm Max. Height Radiator incl. Fan (Front) 5.7 cm Package Contents: DG7000-G RGB, accessory set, 6-port RGB hub, 5-pin to 4-pin adapter, manual color control, RGB LED Strip S1, manual...
Page 5
Front Panel Radiator Installation 280 mm Radiator Detachable Dust Filter...
Page 6
6-Port RGB Hub 12V-G-R-B Connector 5-pin to 4-pin adapter for mainboards with a 5-pin connector RGB LED Fans/Strips The 6-port RGB hub is self-adhesively attached to the case interior and then connected to the mainboard's 12V-G-R-B connector. When connecting any elements, make sure that the 12V contact and the arrow on the corresponding connector are facing each other as shown.
Manual Color Control SATA 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 RGB LED Fans/Strips 1 2 3 1 2 3 To illuminate RGB LED fans and strips on motherboards without a 12V-G-R-B connector, connect the manual color control as shown.
Page 8
Make sure that the 6-port RGB hub is securely attached to the case interior. Contact with conductive surfaces may cause short-circuit hazard. Sharkoon assumes no liability for any data loss, especially due to improper handling.