Auto Standby; Selecting The Input Source - Sennheiser AMBEO Instruction Manual

Auto standby

If there is no playback for 20 minutes, the Soundbar automatically
switches to standby.
No playback:
• Bluetooth or Chromecast input is paused
• Bluetooth or Chromecast connection is disconnected
• Analog, optical or HDMI input: no playback available
When playback is muted ("MUTE"), auto standby is not active.
The time after which the Soundbar switches to auto standby can be
adjusted via the Smart Control app.

Selecting the input source

WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent hear-
ing defects.
▷
Adjust the volume to a low level before selecting a source.
▷
Do not continuously expose yourself to high volume lev-
els.
If you want to change the input source, you have the following
options:
• Press the SOURCE
• Press the SOURCE
• Use the Smart Control app.
Source selection:
• HDMI TV
• HDMI 1
• HDMI 2
• HDMI 3
• AUX
• Optical
Using the AMBEO Soundbar
button on the Soundbar.
button on the remote control.
AMBEO Soundbar | 33