Connecting An Ethernet Cable; Using The Cable Tie - Sennheiser AMBEO Instruction Manual

Connecting an Ethernet cable

To connect the Soundbar to a wired network:
▷
Connect one connector of a network cable (with RJ-45 connector,
to be ordered separately) to the
bar.
▷
Connect the other connector of the cable to the network socket of
your router.
You may have to make settings to your router.
If you connect the Soundbar to the Internet/Ethernet via cable,
the WiFi function of the Soundbar is automatically deactivated.
Alternatively, the Soundbar can be connected to the Internet via
WiFi. For more information

Using the cable tie

To achieve strain relief on the sockets of the Soundbar:
▷
Bundle the cables.
▷
Place the cables in the cable tie and tighten it.
▷
Close the cable tie.
Connecting devices to the AMBEO Soundbar
ETHERNET socket on the Sound-
Router
LAN
> 39.
AMBEO Soundbar | 25