Putting The Ambeo Soundbar Into Operation; Preparing The Sb01-Rc Remote Control; Connecting/Disconnecting The Soundbar To/From The Power Supply System - Sennheiser AMBEO Instruction Manual

Putting the AMBEO Soundbar into
operation

Preparing the SB01-RC remote control

To remove the transport protection of the battery:
▷
Use a suitable object (e.g. a coin) to open the battery compart-
ment cover (located on the bottom side of the remote control) by
turning one turn counter-clockwise.
▷
Remove the plastic strip.
▷
Close the battery compartment cover by turning one turn clock-
wise.
Connecting/disconnecting the Soundbar
to/from the power supply system
CAUTION
Danger of damage to the product!
If you connect to an unsuitable power supply, the product can be
damaged.
▷
Use a suitable power cable to connect the product to the power
supply system (100 - 240 V~, 50/60 Hz).
Connecting the Soundbar to the power supply system
▷
Connect the plug of the power cable to the
Soundbar.
▷
Connect the power plug of the power cable to a suitable wall
socket.

Putting the AMBEO Soundbar into operation

POWER
AMBEO Soundbar | 27
socket on the