Installing Chain And Cable - beamUP 2211-U Product Manual

INSTALLING CABLE AND CHAIN
Look in the box for:
Chain/Cable Assembly
Master Link
WARNING
To prevent SERIOUS INJURY:
• DO NOT connect power until instructed.
• Keep hands and fingers clear from sprocket during
operation.
• Wear gloves when installing chain and cable.
• Keep hands and fingers away from joints and
possible sharp edges.
Align end of chain around sprocket and extend chain past chassis. Pull chain with box along the rail towards
trolley and then remove box.
Chassis
Insert cable through circular
hole in trolley. Pull cable
through pulley slot and
toward power head.
Pull trolley lock lever down
to unlock. Insert trolley shaft
into trolley. Lock trolley shaft in
trolley by pulling lever back up.
Trolley in engaged
position
Bring cable and chain
together and connect cable
and chain with master link.
beamLabs.io 1-800-436-9186
7