ATTACHING RAIL AND MOUNTING DOOR BRACKET
Look in the box for:
Hitch Pin
Door Bracket
2 x Self-Threading
Screw - 1/4" x 5/8"
CAUTION!
To prevent SERIOUS INJURY:
• DO NOT connect power until instructed.
• REINFORCEMENT is recommended for fiberglass,
aluminum or lightweight steel garage doors
BEFORE installing the door bracket. Contact your
door manufacturer for reinforcement options.
10
beamLabs.io
1-800-436-9186
Clevis Pin
3/8" x 1-3/4"
Connect header rail and header bracket with clevis
pin and secure with hitch pin.
Use garage door opener carton to support power
head. Rail return pulley end should be pointing to
header bracket.
Center Line
Align header rail hole to header bracket hole.
Header
Rail Hole
Position door bracket on centerline of the top
garage door panel. Door bracket should be 2-4
inches (5-10 cm) below the top edge of door panel.
Door
Edge
2" - 4"
Header
Bracket Hole