Setting The Force - beamUP 2211-U Product Manual

SETTING THE FORCE

WARNING
To prevent SERIOUS INJURY or DEATH from
improper Force Adjustment:
• YOU CANNOT adjust force manually to compensate
for binding or sticking of the garage door. Call
a qualified garage door service person to make
necessary adjustments in case of binding.
• YOU CANNOT manually increase the force required
for closing the door.
• After ANY adjustments, Safety Reverse Test MUST
be performed to ensure the door reverses on
contact with a 1.5" (3.8 cm) high object (2x4 laid
flat).
With both UP and DOWN lights on, press and release the
FORCE button once to enter Auto Force Setting.
The door will travel Stop at UP limit for 2
UP automatically. seconds.
Need text from up down limit 110518 PDF
Door will then
travel DOWN
automatically.
2 sec
And stop at down limit.
OK indicator (orange)
will flash with beeps,
Auto Force Setting is
completed.
Flash and 2
beeps
21
beamLabs.io 1-800-436-9186