Table of Contents
Advertisement
Vibe
E
Control
1
Switching on the Vibe
Figure 4: On/o button
Press and hold the on/off button (6) for several seconds.
If the device was in sleep mode, it can be used immediately. If the device was switched off, then Windows 10 must be started first.
See also
Shutting down the Vibe
on page 17
Completely resetting the Vibe
2
Charging the Vibe
The amount of time you can use your device without needing to charge it depends greatly on how you use it:
•
the audio volume
•
the time set before the device reverts to sleep mode
•
your Bluetooth and Wi-Fi use
If the device is used a lot, it is recommended to recharge it every day. To do this, use only the supplied power adapter. The device can still be used
while charging. A charge status between 40 % and 90 % increases the service life of the battery.
Charge the device preferably at room temperature (about 20 °C / 68 °F). Temperatures lower than 5 °C (41 °F) and higher than 45 °C (113 °F) can have a
negative effect on the battery.
1.
Check the power status. See
E
Control
10
1
Switching on the Vibe
on page 16
Viewing the power status
on page 11.
Advertisement
Table of Contents
Troubleshooting
