Louver Lock (No Swing) - Toshiba RAV-SM564UT-K Owner's Manual

4-way Air Discharge Cassette Type

Louver lock (No swing)

3
4
1
Push (right side of the button) for at
least four seconds when the air conditioner
is not working.
• , symbol, and numbers flash.
2
Push (left side of the buttom) to
select an indoor unit to be set.
• Each time you push the button, unit numbers
change as follows:
The fan of the selected unit runs and the louvers
start swinging.
UNIT No. UNIT No.
1-1 1-2
UNIT No.
1-4
3
Push TEMP.
number of a louver you want to lock on the
temperature display.
• The selected louver starts swinging.
4
Push TIME buttons to select the
louver direction of the louver you do not
want to swing.
SET DATA
(1)
0001
(4)
0004
UNIT No.
1-3
buttons to display the
(2) (3)
0002 0003
(5)
0005
– 42 –
2 1
CAUTION
• If (4) or (5) is selected, condensation may drop from
the unit during operation in cooling mode.
5
Push button to lock the louver.
• When the setting has been determined,
lights up.
(To continue louver lock settings for other indoor
units, repeat from step 2. To continue louver
lock settings for other louvers on the same
indoor unit, repeat from step 3.)
6
Push button to complete the setting.
0001-0005
(Louver lock position SET DATA)
• A louver number is displayed as F1, F2 on the
remote controller (SET DATA), showing that
louver 01, 02 shown in the figure on the previous
page is selected.
NOTE
Even when louvers are locked, they move temporarily
in the following cases:
• While the air conditioner is stopping
• At the beginning of heating operation
• During defrosting operation
• When the room temperature reached the set
temperature
Owner's Manual
EN
17-EN