x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press WEGA GATE and select "Settings".
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "DRC-MF"), then press
Select
"DRC-MF"
"Picture Mode"
"3D Intelligent Picture"
(KV-DB29M98 only)
"Intelligent Picture"
(KV-DB29M91 only)
"NR"
(Noise Reduction)
(KV-DB29M91 only)
* You can adjust the setting to your personal preference in the "Picture Adjustment"
option only when the "Custom" mode is selected (see page 20).
Notes
• The DRC-MF mode is not selectable when "Game Mode" mode is turned "On". The mode is
not available for HD (high-definition) and progressive input signals.
• "3D Intelligent Picture" is not available in HD and progressive input signal (KV-DB29M98
only).
• For NTSC 3.58 color system, "3D Comb Filter: On" or "3D-NR: On" display will appear when
"3D Intelligent Picture" changes from one mode to the other. For PAL color system, Digital
Comb Filter and 3D-NR are also available (KV-DB29M98 only).
• "NR" is not selectable when receiving signals through the
(component video input) terminals (KV-DB29M91 only).
The DRC-MF logo (
Corporation.
) is
.
To
choose either "DRC1250" (for high density pictures), "DRC100"
(reduce flicker on the screen) or "Progressive" (reduce jitter of
any small areas or scanning lines on the screen).
choose either "Vivid", "Standard" or "Custom"* (see page 11).
optimize picture quality.
Automatically, the picture will become clearer and sharper if the
signal is good and noise will be reduced if the signal is noisy.
Press V or v to select "On", then press
To cancel, select "Off", then press
optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
optimize overall picture sharpness to reduce noise.
Choose either "High", "Low" or "Off".
) and "DRC-MF" are trademarks of Sony
Picture
DRC-MF:
DRC1250
Picture Mode:
Vivid
Picture Adjustment
3D Intelligent Picture:
Select
Confirm
.
.
.
.
(S video input) or
Menu Adjustment
On
End
.
continue
19