Changing The "Picture" Setting - Sony WEGA KV-AR252 Operating Instructions Manual

x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press MENU.
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "Mode"), then press
Select
"Mode"
"Color Temperature"
"VM"
(Velocity Modulation)
"3D Intelligent Picture"
* You can adjust the setting to your personal preference in the "Picture Adjustment",
"Color Temperature" and "VM" options only when the "Personal" mode is selected (see
page 17).
Note
• "3D Intelligent Picture" is available only for PAL and NTSC 3.58 color systems through 8
antenna and
"3D–NR : On" display will appear. For PAL color system, Digital Comb Filter and 3D-NR are
also available.
16
Menu Adjustment
.
To
choose either "Dynamic", "Standard", "Soft" or "Personal"*
(see page 11).
adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
sharpen the edges of each object.
Choose either "High", "Low" or "Off".
optimize picture quality.
Automatically, the picture will become clearer and sharper if the
signal is good and noise will be reduced if the signal is noisy.
Press V or v to select "On", then press
To cancel, select "Off", then press
video input terminals. For NTSC 3.58 color system, "3D Comb Filter : On" or
) is
Picture
Mode: Dynamic
Picture Adjustment
Color Temperature: Cool
VM:
High
3D Intelligent Picture: On
Select
Confirm
.
.
.
End