Page 2
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
Installation x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 3.8 mm screws Note • Use only the supplied screws. Use of other screws may damage the TV. Installation 20 mm clamps...
x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...
x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Начальная настройкa“ (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel.
Page 7
d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, Then press 1) To label, press V or v to select the alphanumeric characters for the label.
Overview of Controls TV front and rear panels AUTO PROG:Press [MENU] for 5sec L(MONO) SOUND MENU MODE (AUTO PROG) PROG TV front panel L(MONO) Button/Terminal PROG +/– 2 +/– WEGA GATE menu operations V,v,B,b WEGA GATE SOUND MODE t1, t3 Overview of Controls TV rear panel WEGA GATE...
Using the remote control and basic functions VIDEO WEGA THEATRE PROG INDEX WEGA GATE RETURN OPTION Button Description 1 ?/1 Turn off temporarily or turn on the TV. Display the TV program. Select TV or video input. Stereo/bilingual operations Select stereo/bilingual mode. PROG INDEX Not function for your TV.
Page 10
continued Button 0 – 9 2 +/– TWIN picture operations Teletext operations (green label) (red, green, yellow, blue) Optional components operations VIDEO ?/1 OPTION > 2 +/– Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and BBE symbol are trademarks of BBE Sound, Inc. Overview of Controls Description Select sound mode options with a 5-Band...
Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Custom” option. VIDEO WEGA THEATRE PROG INDEX WEGA GATE RETURN Selecting the sound mode Press (or SOUND MODE on the front panel) to select the desired sound mode. 5-Band Graphic Equalizer display will appear.
• The WEGA Theatre Mode is automatically cancelled when you change the input mode or turn the TV off and on again. • Some Sony equipment might not respond properly when WEGA THEATRE button is pressed. In this case, use the equipment’s own remote control.
x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. VIDEO WEGA THEATRE PROG INDEX WEGA RETURN GATE OPTION Note • If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound becomes monaural but the noise is reduced.
x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. VIDEO WEGA THEATRE PROG INDEX WEGA GATE...
Operating optional components You can use the supplied remote to operate Sony audio/video equipment. Setting up the remote to work with other connected equipment While keeping VIDEO ?/1 pressed, press the corresponding number button for the desired equipment (see the chart below).
Menu Adjustment Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu. WEGA GATE External Inputs Settings Select Confirm “Settings” How to use WEGA GATE WEGA GATE External Inputs Settings Select...
“Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press The following is an overview of the items that can be adjusted. “Picture”...
Page 18
continued Setup Language: English Picture Position WEGA Theatre Setup Game Mode: Video Label Auto Color System: Select Confirm Note • When a feature is dimmed in the menu, it is not selectable. Menu Adjustment ”Setup” (see page 26) “Language”: “English” “...
Press V or v to select “On”, then press To cancel, select “Off”, then press optimize overall picture sharpness to reduce noise. Choose either “High”, “Low” or “Off”. ) and “DRC-MF” are trademarks of Sony Picture DRC-MF: DRC1250 Picture Mode:...
Page 20
continued Adjusting the “Picture Adjustment” items under “Custom” mode Press V or v to select either “Picture” (contrast), “Brightness”, “Color”, “Hue” (color tones),“Sharpness” or “Color Temperature” (choose either “Cool”, “Neutral” or “Warm”), then press Selecting “Reset” will set your TV to the factory settings. Press V,v,B or b to adjust the setting of your selected item, then press Repeat the above steps to adjust other items.
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” icon ( ), then press Press V or v to select the desired item (e.g., “Sound Mode”), then press Select “Sound Mode”...
Page 22
continued Adjusting the “Sound Adjustment” items under “Custom” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Custom” mode in the menu. Make sure that “Adjust” is selected, then press Selecting “Reset” will set your TV to the factory settings.
x Changing the “Wide Screen” setting The “Wide Screen” menu allows you to view the picture with optimal effect when receiving wide-mode (16:9) picture signal. Press WEGA GATE and select “Settings”. Press V or v to select the “Wide Screen” icon ( ), then press Press V or v to select the desired item (e.g., “Wide Mode”), then press...
x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels and sort or edit the channels. Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” icon ( ), then press Press V or v to select the desired item (e.g., “Auto Program”), then press...
Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press Select the desired channel.
x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, setup WEGA Theatre Mode, adjust suitable picture setting for video games, label the connected equipment, select the color system, reduce your TV power consumption and reset your TV to factory settings.
Page 27
Select “Video Label” “Color System” “Eco Mode” “Factory Settings” Notes • You cannot adjust “Picture Rotation” and “Picture V-Position” when high-definition (1080i, 720p) signals are input. • “Game Mode” is available only when receiving signals through the (S video input) or (component video input) terminals.
Additional Information x Connecting optional components Connecting to the video input terminal ( t ) TV front panel L(MONO) TV rear panel Notes • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 25).
Connecting to the component video input terminal ( TV rear panel Notes • The component video terminals on your DVD player are sometimes labeled Y/C or Y/B-Y/R-Y. • If you select “HD/DVD 1” or “HD/DVD 2” on your TV screen, the signal from the T (monitor output) terminals will not be output properly.
• Check the antenna cable and connection on the TV, VCR and at the wall noisy sound (see page 28). • Check the antenna setup. Contact a Sony dealer for advice. • Display the “Channel Setup” menu and select “Manual Program” to preset the channel again (see page 25).
Page 31
• Use the fine tuning (“Fine”) function (see page 25). The 1 (standby) • Count the number of times the 1 (standby) indicator flashes. indicator on your TV Press ! (main power) to turn off your TV. Contact your nearest Sony flashes red several service center. times after every three seconds.
Specifications Power requirements 220-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Stereo/Bilingual system NICAM Stereo/Bilingual B/G, I, D/K; A2 Stereo/Bilingual B/G Teletext language Russian, English Channel coverage...
Page 34
Содержание Установка Элементы управления Более сложные функции Sony Corporation 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo, 141-0001 Japan. Настройка с помощью меню Дополнительная информация Задняя крышка...
Page 35
Установка x Безопасная установка телевизора Во избежание падения ТВ используйте прилагаемые винты, зажимы и крепежную ленту. Винты Примечание • Используйте только прилагаемые винты. Использование других винтов может повредить ТВ. Установка 20 мм 3,8 мм Зажимы С помощью винтов прикрепите один конец...