Step 2: Insert The Batteries Into The Remote; Step 3: Preset The Channels Automatically - Sony Trinitron KV-XA21 Operating Instructions Manual

Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
• When no signal is input from the connected video equipment, the TV
KV-XG29M81/XG29M80/XG25M80 only
• Do not connect video equipment to the t 2 (video input) jacks at the
CAUTION
• Do not connect the power cord until you have completed making all other
• To avoid battery leakage and damage to the remote, remove the batteries
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
2
L(MONO) R SELECT AUTO PROGR
PROGR
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
Note
• During automatic channel presetting, your TV screen will indicate
yellow jack) and the black plug to -L (MONO) (the white jack).
output from the VCR to the program number 0 on the TV.
screen becomes blue.
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
1
!
2
AUTO
PROGR
channel, then preset your TV manually (see page 11).
"B/G" , "I", "D/K" or "M" for the TV system (TV SYS).
1
VHF LOW B/G
(the
1
Using Your New TV
5