Manual Set Up Menu - Sony FD Trinitron WEGA KV-36FS76 U Operating Instructions Manual

With the 'AV Preset' option highlighted, press b to enter the 'AV Preset' menu. Press v or V to
highlight the socket you wish to name. Press b to select the AUTO FORMAT column. Press v or V
to select 'Off' or 'On'. (For more details on 'Auto Format', refer to 'Features menu'.) Press b to select
the LABEL column. Press v or V to select the first character. Press b to confirm this character.
Select the other characters in the same way (up to a maximum of five characters). After selecting
all required characters, press OK to store.
Manual Set Up
With the 'Manual Set Up' option highlighted, press b to enter the 'Manual Set Up' menu. The
'Manual Set Up' menu is explained below.

Manual Set Up menu

This menu gives you access to more advanced features. The options are:
MODE
Language/Country
When you first installed the TV you were asked to select your language and country. The 'Language/
Country' option in the 'Manual Set Up' menu allows you to change these settings.
1 2 3
4 5 6
With the 'Language/Country' option highlighted, press b to enter the 'Language/Country' menu.
Press v or V to select 'Language' or 'Country'. Press b to adjust. Press v or V to highlight the
7 8 9
required setting. Press OK to confirm.
0
Manual Programme Preset
With the 'Manual Programme Preset' option highlighted, press b to enter the 'Manual Programme
Preset' menu. The 'Manual Programme Preset' menu is explained on the following page.
Further Programme Preset
With the 'Further Programme Preset' option highlighted, press b to enter the 'Further Programme
Preset' menu. The 'Further Programme Preset' menu is explained on page 20.
RGB Set Up
When viewing signals from RGB equipment connected to the AV1 or AV2 sockets (e.g. DVD player,
PlayStation) the picture may need adjusting. The 'RGB Set Up' option in the 'Manual Set Up' menu
allows you to adjust the size and horizontal picture position of signals from RGB equipment.
With the 'RGB Set Up' option highlighted, press b to enter the 'RGB Set Up' menu. Press b to select
H Centre. Press v or V to centralise the picture over a range of -10 to +10. Press OK to store. Press
v to select H Size. Press v or V to adjust the picture size over a range of -10 to +10. Press OK to
store.
Note: If there is no RGB equipment connected to either the AV1 or AV2 scart socket the 'RGB Set Up' option
Picture Rotation
Due to the Earth's natural magnetism the picture might slant slightly. The 'Picture Rotation' option
in the 'Manual Set Up' menu allows you to cancel out this effect.
With the 'Picture Rotation' option highlighted, press b to select. Press v or V to rotate the picture
over a range of -5 to +5. Press OK to store.
Personal ID
The 'Personal ID' option in the 'Manual Set Up' menu allows you to enter a code which could help
to trace you should the TV be stolen and recovered. This code can only be entered once - please
make a note of it and keep it safe.
With the 'Personal ID' option highlighted, press b to select. Press v or V to display the first character
of the code you wish to use. Press b to select. Repeat until all characters have been entered. Press
OK to store. A confirmation screen is displayed. Press OK to confirm.
18 Advanced Operation
will not be available.