Satellite Receiver - Sony KV-32HS500 Instructions: TV stand (primary manual) Operating Instructions Manual

Satellite Receiver

Using
S VIDEO jacks?
See page 21.
TV
28
To connect a satellite receiver
1
Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
2
Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
3
Connect a CATV cable from your cable or antenna to the TV's
VHF/UHF jack.
4
Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 38.
A/V cable

Satellite receiver

color-coded to connectors.
CATV cable
Satellite antenna
cable
Cables are often
Connect red to red,
white to white, etc.