Satellite Receiver - Sony WEGA KV-30XBR910 Operating Instructions Manual

Satellite Receiver
Toconnecta satellite receiver
1 Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
2 Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
Connect a CATV cable from your cable or antenna to the TV's
VHF/UHF jack.
4 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 41.
A/V cable
CATVcable
Satellite antenna
cable
1