Sony KV-32HS500 Instructions: TV stand (primary manual) Operating Instructions Manual page 30

Notes on Using This Connection
To Do This ...
Watch the satellite receiver
Set up the TV remote control to operate the
satellite receiver
Activate the TV remote control to operate
the satellite receiver
Control satellite receiver functions with the
TV remote control
Label video inputs to easily identify
equipment connected to the TV
Do This ...
Press TV/VIDEO repeatedly to select the satellite receiver input
(VIDEO 1 in the illustration).
If you have a non-Sony satellite receiver, you must program
the remote control. See "Programming the Remote Control"
on pages 43-44.
Press SAT/CABLE FUNCTION.
See "Operating a Satellite Receiver" on page 58.
See the instructions for setting up Video Labels on pages 72-
73.
29