Overview; Overview Of Remote Control Buttons - Sony KV-32FX66U Instruction Manual

1
@£
@™
2
@¡
3
@º
4
5
!ª
6
!•
7
!¶
8
!§
9
!º
!∞
!¡
!™
!¢
!£
7
repeatedly to change the format of the screen. For
more details refer to chapter "Auto Format" on
page 12.
8 This button only works in Teletext mode.
9
Press this button to switch
on teletext.
!º
• When MENU is switched on, use these buttons
to operate the menu system. For details refer to
"Introducing and Using the Menu System" on
page 10.
• When MENU is switched off, press OK to
show a channel overview. Then press
to select the channel and then press again
the OK button to watch the selected channel.
Using these buttons you can control the main
functions of your VCR or DVD.
!¡
button to display the menu on the TV screen.
Press again to remove the menu display from the
TV screen.
!™
select the next or previous broadcast channel.
!£
For more details refer to chapter
"NexTView" on page 19.
Besides TV functions, all coloured buttons as well as green symbols are also used for
Teletext operation. For more details, please refer to "Teletext" section on page 18.
1
Press this button to temporarily switch off TV (the standby indicator
the TV lights up). Press again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use.
After 15 minutes without a signal and without any button being
pressed, the TV switches automatically into standby mode.
2
3
With this remote control you can operate not only this TV but also the main
functions of your VCR or DVD. Switch on the device you want to operate and
next press this button repeatedly to select the VCR, TV or DVD. A green
light will be momentarily lit to indicate the chosen function.
Before the first time you want to control a DVD or VCR by using this
remote control, you have to set it up depending on the brand of the
device to be used. For more details, refer to chapter "Remote Control
Configuration for VCR or DVD" on page 23.
4
input symbol of the source appears on the TV screen.
5
If Media Selector is switched to TV or VCR, press this button to select
channels.
For double-digit programme numbers, enter the second digit within 2.5
seconds.
6
Press this button to watch the last channel selected (the last channel
watched for at least 5 seconds).
For Sony's VCR double-digit programme numbers, e.g. 23, press -/- -
first and then the buttons 2 and 3.
Press this button
or
Press this
Press these buttons to
Press this button to switch your VCR or DVD on or off.
Press this button repeatedly until the desired
!¢
adjust the volume of the TV.
!∞
switched to VCR, press this button to record
programmes.
!§
off PIP, teletext or video input.
!¶
repeatedly to change the picture mode.
!•
repeatedly to change the sound effect.
!ª
this button to display all on-screen indications.
Press again to cancel.
@º
freeze the picture. The screen is divided into two
screens. On the left with the normal picture, on
the right the picture is freezed. Press this button
again to return to the normal picture.
@¡
mode, press this button to swap the two screens.
@™
watch another source in a small picture (PIP)
within the main TV picture. Press again to cancel.
To select the source you want to watch, refer to
the chapter "PIP Input" on page 13.
@£
TV sound. Press again to restore the sound.
on
Press these buttons to
If Media Selector is
Press this button to switch
Press this button
Press this button
Press
Press this button to
Whilst you are in "PIP"
Press this button to
Press this button to mute

Overview

GB
5