Manual Programme Preset - Sony KV-32FX66U Instruction Manual

Level 1
2 After selecting the Channel option, press
directly the channel number of the TV Broadcast or the channel of the VCR signal. If you
do not know the channel number, press
desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press
select a letter, number or "-" for a blank. Press
four characters in the same way. After selecting all the characters, press OK twice to store.
c)
Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the
best possible picture, however you can manually fine tune the TV to obtain a better picture
reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press
Finally press OK twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROG +/-
buttons.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number you want to skip. When the programme you want to skip
appears on the screen, select the Skip option and press
Yes. Finally press OK twice to confirm and store.
To cancel this function afterwards, select "No" instead of "Yes" in the step above.
16
Menu System
Level 2
. Next press or
Level 3 / Function

MANUAL PROGRAMME PRESET

The "Manual Programme Preset" option in the
"Set Up" menu allows you to:
a)
Preset channels or the VCR channel one by
one to the programme order of your choice.
To do this:
1 After selecting the "Manual Programme
Preset" option, press
Programme option highlighted press
Press or to select which programme
number you want to preset the channel on
(for VCR, select programme number "0").
Then press .
. Then press the number buttons to enter
or to search for it. When you tune the
to confirm this character. Select the other
to adjust the fine tuning between -15 and +15.
. Next press
then with
r
. Next press o
or to select
continued...
.
to