Sony KV-32FX66U Instruction Manual page 8

4
You can assign an ID (number) to your Remote Control to
avoid interference from other locators when you press the
Remote Control Locator button on the TV set.
a)
If you do not want to configure it, press OK to select
No.
b)
If you want to configure it press
OK. Next press one of the number buttons (0-9) and
press OK to store.
The remote control beeps. Press OK to stop
beeping.
ID should be assigned anytime the batteries of the
remote control will be replaced.
Finally press OK to continue the process.
5
The Auto Tuning menu appears on the screen. Press the
OK button to select Yes.
6
The TV starts to automatically search and store all
available broadcast channels for you.
This procedure could take some minutes. Please be
patient and do not press any buttons, otherwise
automatic tuning will not be completed.
In some countries the TV Broadcaster installs the
channels automatically (ACI system). In this case,
the TV Broadcaster sends a menu in which you can
select your city by pressing the
OK to store the channels.
If no channels were found during the auto tuning
process then a new menu appears automatically on
the screen asking you to connect the aerial. Please
connect the aerial (see page 6) and press OK. The
auto tuning process will start again.
8
First Time Operation
to select Yes. Press
or button and
continued...