Siemens Flowrite 599 Series Technical Instructions page 9

Flowrite 599 Series SKB/C/D 62UA Electronic Valve Actuator Advanced Features
Start-up, Continued
Advanced Features
DIP Switches
(From Left to Right)
ON
OFF
(Factory Settings)
*
Changing the default setting will modify an equal percentage valve to a linear flow characteristic. When
set to default, the flow characteristic is determined by the valve body.
Siemens Industry, Inc.
1
1
Select Sequence Control
Direction of
Operation Stroke Limit Control
Reverse-acting Sequence control
Direct-acting Stroke limit control
2 3
Figure 13. DIP Switches.
2 3
Selection of
or Control
Signal
4 to 20 mA
0 to 10 Vdc
Technical Instructions
Document Number 155-717
September 25, 2018
4
4
Selection of
Flow
Characteristic
Modified*
Default
Page 9