Table of Contents
Advertisement
AC4490 Hardware Integration Guide
OEM Equipment Labeling Requirements
WARNING: The OEM must ensure that FCC labeling requirements are met. This includes a clearly
visible label on the outside of the OEM enclosure specifying the appropriate Laird FCC identifier for
this product as well as the FCC notice below. The FCC identifiers are listed above.
Contains FCC ID: KQLAC4490 / KQL-4x90200
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may cause
undesired operation.
Label and text information should be in a size of type large enough to be readily legible, consistent with the
dimensions of the equipment and the label. However, the type size for the text is not required to be larger
than eight point (8 pt).
Antenna Requirements
WARNING: This device has been tested with an MMCX connector with the above listed antennas.
When integrated into the OEM's product, these fixed antennas require professional installation
preventing end-users from replacing them with non-approved antennas. Antenna Y2283 and
SG101N915 strictly require professional installation. Any antenna not in the previous table must be
tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for
emissions. Contact Laird for assistance.
Caution: Any change or modification not expressly approved by Laird could void the user's
authority to operate the equipment.
Warnings Required in OEM Manuals
WARNING: This equipment has been approved for mobile applications where the equipment should
be used at distances greater than 20 cm from the human body (with the exception of hands, feet,
wrists, and ankles). Operation at distances of less than 20 cm is strictly prohibited and requires
additional SAR testing.
Channel Warning
The OEM must prevent the end-user from selecting a channel not approved for use by the governing body in
the country in which this product is implemented
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
26
© Copyright 2016 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Advertisement
Table of Contents
