Table of Contents
Advertisement
AC4868 868 MHz Transceiver
User's Manual
C
I
OMPLIANCY
NFORMATION
Agency Identification Numbers
Agency compliancy is a very important requirement for any product development. Laird Technologies has
obtained modular approval for its products so the OEM only has to meet a few requirements to be eligible to
use that approval. The corresponding agency identification numbers and approved antennas are listed below.
Table 12: Agency Identification Numbers
Part Number
AC4868-250M
Approved Antenna List
The following antennas are approved for use with the AC4868-250 as identified. The OEM is free to choose
another vendor's antenna of like type and equal or lesser gain as a listed antenna and still maintain
compliance.
Table 13: AC4868-250 Approved Antennas
Laird Part #
Manufacturer Part #
0600-00020
S467-FL-6-RMM-868S
OEM Equipment Labeling Requirements
WARNING: The OEM must ensure that the appropriate labeling requirements are met. Following are the
requirements for labeling equipment:
If the CE marking is reduced or enlarged, the proportions given in the following graduated drawing must
be respected.
The CE marking must have a height of at least 5 mm except where this is not possible on account of the
nature of the apparatus.
The CE marking must be affixed to the product or to its data plate. Additionally, it must be affixed to the
packaging, if any, and to the accompanying documents.
The CE marking must be affixed visibly, legibly, and indelibly.
The exclamation point must be included with the CE mark (as shown below) to alert the user that there
are restrictions placed on usage in certain countries. It must have the same height as the CE mark.
Americas: +1-800-492-2320 Option 3
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
www.lairdtech.com/ramp
EUR/EN
Approved
Manufacturer
Nearson
Type
Gain
(dBi)
½ Wave Dipole
2
35
200A
200M
1000M
-
X
X
Laird Technologies
Advertisement
Table of Contents
