Xerox Color 1000i Design Manual page 23

Indicate whether the selection
4
should be applied to all pages
or a subset.
Print the file.
5
Mapping the fifth color
If the file has been designed such that
it is predefined with a fifth color but
the naming on the Specialty Color
element(s) is unknown or not named
exactly as Silver or Gold, begin with the
Preflight option so you can determine
the name used for the Specialty Color.
4
Note: Files designed to be printed with
one Specialty Dry Ink can be treated
with any Specialty Dry Ink by adding
a new spot color.
Right-click on the uploaded file
1
and choose Preflight.
In the Preflight results, look under
2
Spot Colors and note the name
of the fifth color element(s).
Select Device Center back on
3
the home screen and select
the Specialty Color tab under
Resources. Choose New on the
Silver or Gold Look Up Table.
Add the name of the fifth color
4
element exactly as it appeared
in the Preflight results.
3
Go to Properties and set up the job.
5
Choose the Specialty Colors
6
tab and select Apply for ['Silver'
or 'Gold'] spot color(s) and
selected objects. Leave the
boxes below unchecked.
Print the file.
7
4
23