Xerox Color 1000i Design Manual page 25

Note: When designing for Multi-Pass, it
is important that the isolated metallic
objects align perfectly to the original file.
Multi-Pass application
of Metallic Dry Inks
For both print servers, Multi-Pass
application of Metallic Dry Inks
is a manual process.
3
Preparing to print with
Xerox FreeFlow Print Server
® ®
As instructed in the design steps, start
by creating an additional PDF that
isolates the desired metallic objects.
Preparing to print with Xerox
1000i Print Server Powered by Fiery
Either create an additional PDF in the
design phase, or isolate the specific
separations containing Metallic Dry Inks
using the Fiery ImageViewer.
4
Process and hold the file, then
1
right click and duplicate the job.
Rename the duplicate job.
2
Right click the duplicate job
3
and open ImageViewer.
EX-P
®
Under Separations, uncheck
® 4
the CMYK options so that only
Silver or Gold is selected.
Save the changes and close
5
the ImageViewer.
25