Table of Contents
Advertisement
Wheels, Tyre Pressure & Front Brake Fluid Level
Wheels
Use the recommended levers while removing
the Tyre / Tube for puncture work. This will
avoid any damages to the edges / scratches
on paint of the wheel.
Motorcycle if fitted with spokes wheel ensure
spokes are always tight. Broken spoke should
be replaced immediately.
Note :
Incase the motorcycle is fitted with
imported tyres. Compliance to respective
indian standard & central motor vehicle rules
has been ensured.
Tyre Pressure :
Keep appropriate tyre pressure as mentioned
below to increase life of the tyre & for better
fuel consumption.
Front
Rear (Solo)
Rear (with Pillion)
Front Brake Fluid
Level :
Front brake fluid master
cylinder reservoir is
located near RH switch
on handle bar.
• To check brake fluid level, keep vehicle on
Centre stand with handle bar in straight
ahead position.
• Always ensure that brake fluid level is
above 'MIN' mark.
• Use only DOT 3 or DOT 4 brake fluid (from
sealed container) to top up if required.
It is advisable that brake fluid should be
replenished at every 30,000 Kms or once in
two years which ever occurs earlier.
22
1.75 Kg/cm (25 PSI)
2
2
2.00 Kg/cm (28.5 PSI)
2
2.25 Kg/cm (32 PSI)
Hide quick links:
Advertisement
Table of Contents
